The A011 FlexBlock™ High Output, Wide Range LED Power Module is a true current regulated driver for powering high power LEDs at 700mA.

What makes this LED driver especially unique is it's ability to power 1 to 6 series connected high power LEDs at 700mA from any input voltage from 10V to 32VDC. (Buck-Boost Mode) And from 6 to 14 series connected LEDs with an input voltage as low as 10V. (Boost Only Mode)

The FlexBlock LED driver provide high efficiency and requires no external current limiting resistors. It offers a fast response current-sensing circuit makes the FlexBlock ideal for applications where flashing or strobe operation of the LED(s) is required. The driver is potted in an extremely small, low profile package and come with 6” 18AWG colored leads, making hookup fast and easy. Additionally, the output from this driver can be dimmed using many commercially available 0-10V low voltage dimming controls.

Overall this is one of the most flexible LED drivers available today and offers:

• External analog/digital intensity control
• External potentiometer intensity control (0%, 5-100%)
• Continuous output short circuit protection
• Continuous output open circuit protection
• Input reverse polarity protection with Polarifet™ Technology
• Pulse and strobe capable (dim input)
• DC input voltage up to 32V
• 700mA constant current output
• Extremely small form factor (2.0" x 1.2" x 0.38")
• 18 AWG wires for easy electrical connections
• 0-10V Dimming compatible with many available dimming controls

Be sure to check out the technical documentation to learn more about why this is called the FlexBlock!