Luxeon Star LEDs
Rebel Star LEDs
Rebel Tri-Star LEDs
Rebel 10mm Square LEDs
Rebel Side Emitting LEDs
Rebel 7 LED Round Assemblies
Rebel Star/O LEDs
Rebel 25mm Round LEDs
Rebel Quad LED Assemblies
Rebel LED Optics
LED Power Drivers
Rebel LED Mounting Bases
Hong Kong Dollars
New Zealand Dollar
South African Rand
South Korean Won
(Your shopping cart is empty)
Rebel 10mm Square LEDs
Saber 10mm Square LEDs
Blue 10mm Squares
Blue (470 nm) Rebel LED, Pre-Mounted On A 10mm Square Base - 28 lm @ 700mA
The MR-B0013-10S is being discontinued. Our
CoolBase LED assembly may be a suitable alternative.
We will continue to offer the MR-B0013-10S until existing stock has run out.
Exclusive to Luxeon Star LEDs, this is a single
Blue Rebel LED pre-soldered to our
Saber 10mm square
MCPCB base. The Saber base makes it easy to mount the LED to a suitable heat sink and to work with the LED using standard bench top soldering and hand tools. The MR-B0013-10S can be ordered in any quantity with quantity discounts available.
Lumens @ 350mA
Lumens @ 700mA
Lumens per Watt
460 nm to 490 nm
Color Wavelength Range
Recommended Max Current
Maximum Rated Drive Current
Typical Forward Voltage
Maximum Junction Temp
10mm x 10mm x 3mm
LED Part Number
Values based on 350mA and a Thermal Pad temperature of 25C.
Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
This is the maximum operating current that we recommend for this LED. Higher drive currents are possible, but requires careful design of a suitable cooling system.
Typical thermal resistance from the LED Junction to the bottom of the aluminum base.
Qty in Stock
Once we are out of stock, this item will no longer be available
Part No :
Product Videos & Renderings
The Saber 10mm square base used in this assembly is designed to precisely mount and position a single Carclo 10mm square optic over the LED using RTV or optical adhesive. We offer a complete selection of
Carclo lenses here
To fasten this LED assembly to a heat sink we recommend our
pre-cut Bond-Ply 100
pressure sensitive, double sided thermal tape. Pads are cut into 10mm squares, making mounting the LED to a heat sink fast and easy.
Detailed LED Technical Specifications
MCPCB Base Specifications
The MR-B0013-10S offers:
13.9 lumens of Blue light at 350mA and 27 lumens at 700mA
An extremely small footprint at 0.39" x 0.39" (10mm x 10mm)
A selection of compatible
Carclo 10mm lenses
Can be soldered with standard hand tools
No minimum order requirements
Quantity discounts available
RoHS compliant and lead free
Lighting Up A 10mm Pre-Mounted Rebel
Connecting Multiple 10mm Square Rebel LEDs in Series
If you have a high bandwidth connection to the internet, you can watch this video in High Quality or High Definition by selecting 480p or 720p from the toolbar
on the bottom of the video player. You can also watch this video at Full Screen by clicking on the
button on the video control bar.
Having trouble playing the video?
If the video starts and stops a lot try the following:
Try pausing the video for a minute or two by clicking the pause button and then starting it again. This will "buffer" the video to your computer for smoother playback.
If you still have problems, click on the video to go to YouTube. Sometimes videos will play better directly from YouTube.
If the video will not play at all, be sure you have the latest Flash player from Adobe. You can download the latest version
350mA Int Dimmable BuckPuck Driver PCB Mount
350mA Non-Dimmable PowerPuck Driver With Leads
700mA Int Dimmable BuckPuck Driver PCB Mount
Pre-Cut Thermal Tape for 10mm Square Bases 10
700mA Non-Dimmable PowerPuck Driver With Leads
Carclo 29.8° 10mm Frosted Optic With Mounting Legs
Carclo 39.2° 10mm Frosted Optic With Mounting Legs
Carclo 18.4° 10mm Optic With Mounting Legs
Carclo 46° x 16° 10mm Elliptical Optic With Legs
Luxeon Star LEDs
Terms & Conditions
Returns & Refunds
- Powered By