Blue (470nm), Side Emitting LED

Home > Rebel Side Emitting LEDs > Blue Rebel Side Emtters >

Blue (470nm), Side Emitting LED Assembly - 48 lm @ 700mA

This ready to light, side emitting, high power LED assembly combines a Fraen F360L-3-RE-0S side emitting lens mounted to a 15.6 mm by 11 mm FR4 PCB with a single LXML-PB01-0023 Blue LED soldered to the PCB. The assembly has two solder tabs along each side, making it easy to solder to this assembly using standard bench top tools.

Blue

LED Color

Lumens @ 350mA

Lumens @ 700mA

Lumens @ 1000mA

Efficacy (lm/W) @ 350mA

Efficacy (lm/W) @ 700mA

470

Typical Wavelength (nm) (1)

460 to 490

Wavelength Range (nm) (1)

700

Recommended Operating Current (mA) (3)

1000

Maximum Rated Drive Current (mA)

3.3

Typical Forward Voltage (Vf) (4)

3.51

Maximum Forward Voltage (Vf) (4,6)

14.5

Thermal Resistance (C°/W) (1,5)

150

Maximum Junction Temperature (C°)

10 - 60

Operating Temperature Range (C°)

Up to 90%

Optical Efficiency

PMMI

Optic Material

15.6 x 11 x 8.20

Dimensions L x W x H (mm)

1.	Values based on 350mA and a Thermal Pad temperature of 25C.
2.	Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
3.	This is the maximum operating current that we recommend for this LED. Higher drive currents may be possible, but will require careful design of a suitable cooling system.
4.	At the recommended operating current.
5.	Typical thermal resistance from the LED Junction to the bottom of the PCB.
6.	This is the value we recommend you use for determining driver input voltage.

Detailed LED Technical Specifications
MCPCB Base Specifications
Assembly Drawing

Important Note About Stock: We usually only keep a small number of this assembly in stock, however we can produce virtually any quantity that you may require on demand. The lead time for larger quantities is typically 2 to 5 business days. Please contact us for lead times for orders above 1,000 pieces. There is no minimum order requirement for this assembly.

Do you need LEDs with a specific flux, color or forward voltage? Order this LED assembly in 1,000 piece increments and we will build it using LEDs from the same bin. We can also provide specific bin numbers. Contact us for availability.

Click here to learn more about LED binning.

Regular Price: $11.74

Qty in Stock : (No Stock)
Availability : Additional stock - 2 to 3 days
Part No :: SR-04-B0023

Qty:

Additional Details

This SR-04-B0023 offers an ideal solution for any lighting need that requires a side emitting LED light in the smallest possible package and is suitable for:

Portable Lighting (flashlights/torch, bicycle)
Interior reading lights (car, bus,aircraft)
Task Lighting
Accent, Decorative lighting
An alternative to fiber optic lighting
Indoor/outdoor commercial and residential
Architectural Lighting

We recommend that this LED not be powered at more than 700mA unless special precautions are taken to ensure that the LED is properly cooled at higher driver currents. We offer a complete selection of current regulating drivers.

Related Products

Xitanium 120VAC 12W 700mA Driver

700mA, Externally Dimmable, FlexBlock Driver

25mm Square Alpha Heat Sink

Regular Price: $39.83

Regular Price: $19.99

Regular Price: $4.97

700mA, Externally Dimmable, FlexBlock Wide Range DC Driver - With Leads

25mm Square x 15mm High Alpha Heat Sink - 15.5 °C/W

25mm Square x 15mm High Alpha Heat Sink - 17.8 °C/W

Pre-Cut Thermal Tape for 10mm Square Bases 10

700mA Ext Dimmable BuckPuck Driver With Leads

Regular Price: $3.49

Regular Price: $15.99

Pre-Cut, Thermal Adhesive Tape for 10mm Square Bases (10 Piece Sheet)

700mA, Externally Dimmable, BuckPuck DC Driver - With Leads

	Blue (470nm) Luxeon Rebel LED - 70 lm @ 700mA $5.90
	Blue (470nm), 7 LED 40mm Round Assembly - 336 lm @ 700mA $58.34
	Blue (470nm) Rebel LED, Pre-Mounted On A 20mm Star Base - 70 lm @ 700mA $9.84
	Blue (470nm) Rebel LED, Pre-Mounted On A 10mm Square Base - 70 lm @ 700mA $9.54
	Blue (470 nm) Luxeon Rebel LED - 58 lm @ 700mA $6.63
	Saber 10mm Square Blank MCPCB Aluminum Base For Rebel LEDs $0.68
	Pre-Cut, Thermal Adhesive Tape for 20mm Hex Bases (12 Piece Sheet) $7.49
	Saber 20mm Star Blank Aluminum MCPCB Base For A Rebel LEDs $1.25
	Pre-Cut, Thermal Adhesive Tape for 10mm Square Bases (10 Piece Sheet) $3.49