Cool White (6500K) Rebel LED, Pre-Mounted On A 10mm Square Base

Home > Discontinued Products > Rebel 10mm Squares >

Cool White (6500K) Rebel LED, Pre-Mounted On A 10mm Square Base - 160 lm @ 700mA

The MR-WC090-10S has been discontinued.

Our SR-05-WC100 CoolBase LED assembly may be a suitable alternative.

Exclusive to Luxeon Star LEDs, this is a single LXML-PWC1-0090 Cool White Rebel LED pre-soldered to our Saber 10mm square MCPCB base. The Saber base makes it easy to mount the LED to a suitable heat sink and to work with the LED using standard bench top soldering and hand tools. The MR-WC090-10S can be ordered in any quantity with quantity discounts available.

Cool White

Color

90 lm

Lumens @ 350mA

160 lm

Lumens @ 700mA

85 lm/W

Lumens per Watt (1)

6500K

Typical Color Temperature (1)

4500K to 10000K

Color Temperature Range (1)

120°

Beam Angle (2)

700 mA

Recommended Max Current (3)

1000 mA

Maximum Rated Drive Current

70 CRI

Color Rendering Index

3.00 Vf

Typical Forward Voltage (1)

14.5 C°/W

Thermal Resistance (1, 4)

150° C

Maximum Junction Temp

10mm x 10mm x 3mm

Dimensions (L/W/H)

LXML-PWC1-0090

LED Part Number

1.	Values based on 350mA and a Thermal Pad temperature of 25C.
2.	Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
3.	This is the maximum operating current that we recommend for this LED. Higher drive currents are possible, but requires careful design of a suitable cooling system.
4.	Typical thermal resistance from the LED Junction to the bottom of the aluminum base.

Regular Price: $10.35

Qty in Stock : (No Stock)
Availability : No Longer Available
Part No :: MR-WC090-10S

Qty:

Additional Details

Additional Information

Product Videos & Renderings

The Saber 10mm square base used in this assembly is designed to precisely mount and position a single Carclo 10mm square optic over the LED using RTV or optical adhesive. We offer a complete selection of Carclo lenses here.

To fasten this LED assembly to a heat sink we recommend our pre-cut Bond-Ply 100 pressure sensitive, double sided thermal tape. Pads are cut into 10mm squares, making mounting the LED to a heat sink fast and easy.