Home > Rebel 10mm Square LEDs > Cool White 10mm Squares >   Cool White (6500K) Rebel LED, Pre-Mounted On A 10mm Square Base - 220 lm @ 700mA
	As Lumileds is discontinuing the production of the Rebel LXML-PWC1-0120 that is used in this assembly, the MR-WC120-10S is also being discontinued. We will continue to offer this part until we are out of stock. There are two possible substitutions. The MR-WC310-10S which offers a higher lumens output, but will be more yellowish in color (5650K). Or the MR-WC100-10S, which is the same color temperature, but has a reduced lumens output of 180 lumens at 700mA. Do you have a specific requirement that cannot be met with our current line of pre-mounted Rebel LEDs? We offer custom Rebel LED design and assembly services with no minimum order requirements. Contact Us with your requirements and we will prepare a quote for you. Exclusive to Luxeon Star LEDs, this is a single LXML-PWC1-0120 Cool White Rebel LED pre-soldered to our Saber 10mm square MCPCB base. The Saber base makes it easy to mount the LED to a suitable heat sink and to work with the LED using standard bench top soldering and hand tools. The MR-WC120-10S can be ordered in any quantity with quantity discounts available.   Cool White Color 120 lm Lumens @ 350mA 220 lm Lumens @ 700mA 114 lm/W Lumens per Watt (1) 6500K Typical Color Temperature (1) 4500K to 10000K Color Temperature Range (1) 120° Beam Angle (2) 700 mA Recommended Max Current (3) 1000 mA Maximum Rated Drive Current 70 CRI Color Rendering Index 3.00 Vf Typical Forward Voltage (1) 14.5 C°/W Thermal Resistance (1, 4) 150° C Maximum Junction Temp 10mm x 10mm x 3mm Dimensions (L/W/H) LXML-PWC1-0120 LED Part Number 1. Values based on 350mA and a Thermal Pad temperature of 25C. 2. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. 3. This is the maximum operating current that we recommend for this LED. Higher drive currents are possible, but requires careful design of a suitable cooling system. 4. Typical thermal resistance from the LED Junction to the bottom of the aluminum base. Important Note About Stock: We usually only keep a small number of this assembly in stock, however we can produce virtually any quantity that you may require on demand. The lead time for larger quantities is typically 3 to 5 business days. Please contact us for lead times for orders above 1,000 pieces. There is no minimum order requirement for this assembly. Do you need LEDs with a specific flux, color or forward voltage? Order this LED assembly in 1,000 piece increments and we will build it using LEDs from the same bin. We can also provide specific bin numbers. Contact us for availability. Click here to learn more about LED binning. Regular Price: $8.82 Qty in Stock : (No Stock) Availability : No Longer Available Part No :: MR-WC120-10S Qty:

Additional Details Additional Information Product Videos & Renderings   The Saber 10mm square base used in this assembly is designed to precisely mount and position a single Carclo 10mm square optic over the LED using RTV or optical adhesive. We offer a complete selection of Carclo lenses here. To fasten this LED assembly to a heat sink we recommend our pre-cut Bond-Ply 100 pressure sensitive, double sided thermal tape. Pads are cut into 10mm squares, making mounting the LED to a heat sink fast and easy.   Documentation Detailed LED Technical Specifications MCPCB Base Specifications Assembly Drawing The MR-WC120-10S offers: 120 lumens of Cool White light at 350mA and 220 lumens at 700mA An extremely small footprint at 0.39' x 0.39' (10mm x 10mm) A selection of compatible Carclo 10mm lenses. Can be soldered with standard hand tools No minimum order requirements Quantity discounts available RoHS compliant and lead free Lighting Up A 10mm Pre-Mounted Rebel Connecting Multiple 10mm Square Rebel LEDs in Series If you have a high bandwidth connection to the internet, you can watch this video in High Quality or High Definition by selecting 480p or 720p from the toolbar on the bottom of the video player. You can also watch this video at Full Screen by clicking on the button on the video control bar. Having trouble playing the video? If the video starts and stops a lot try the following: Try pausing the video for a minute or two by clicking the pause button and then starting it again. This will "buffer" the video to your computer for smoother playback. If you still have problems, click on the video to go to YouTube. Sometimes videos will play better directly from YouTube. If the video will not play at all, be sure you have the latest Flash player from Adobe. You can download the latest version from here. Related Products 350mA Non-Dimmable PowerPuck Driver With Leads 700mA Int Dimmable BuckPuck Driver PCB Mount 350mA Int Dimmable BuckPuck Driver PCB Mount Carclo 18.4° 10mm Optic With Mounting Legs Regular Price: $18.99 Regular Price: $17.99 Regular Price: $17.99 Regular Price: $1.96 700mA Non-Dimmable PowerPuck Driver With Leads Carclo 29.8° 10mm Frosted Optic With Mounting Legs Carclo 39.2° 10mm Frosted Optic With Mounting Legs Carclo 46° x 16° 10mm Elliptical Optic With Legs Regular Price: $18.99 Regular Price: $2.00 Regular Price: $1.96 Regular Price: $1.96 Pre-Cut Thermal Tape for 10mm Square Bases 10 Regular Price: $3.49

	Pre-Cut, Thermal Adhesive Tape for 10mm Square Bases (10 Piece Sheet) $3.49
	Cool White (6500K) Luxeon Rebel LED - 160 lm @ 700mA $7.14
	Cool White (6500K) Luxeon Rebel LED - 180 lm @ 700mA $7.80
	Saber 10mm Square Blank MCPCB Aluminum Base For Rebel LEDs $0.68
	Cool White (5650K) Rebel LED, Pre-Mounted On A 20mm Tri-Star Base - 705 lm @ 700mA $21.12
	Cool White (5650K) Rebel LED, Pre-Mounted On A 20mm Star Base - 235 lm @ 700mA $9.49
	Cool White (5650K) Rebel LED, Pre-Mounted On A 10mm Square Base - 235 lm @ 700mA $9.02
	Carclo 20mm Fiber Coupling Optic - No Holder $1.80
	Carclo 9.5° x 40° Orthogonal Elliptical 20mm Optic - No Holder $2.10