Cool White (6500K), Side Emitting LED

Home > Rebel Side Emitting LEDs > Cool White Rebel Side Emitters >

Cool White (6500K), Side Emitting LED Assembly - 180 lm @ 700mA

This ready to light, side emitting, high power LED assembly combines a Fraen F360L-3-RE-0S side emitting lens mounted to a 15.6 mm by 11 mm FR4 PCB with a single LXML-PWC1-0100 Cool White LED soldered to the PCB. The assembly has two solder tabs along each side, making it easy to solder to this assembly using standard bench top tools.

Cool White

LED Color

Lumens @ 350mA

180

Lumens @ 700mA

Lumens @ 1000mA

Efficacy (lm/W) @ 350mA

Efficacy (lm/W) @ 700mA

6500

Typical Color Temperature (K) (1)

4500 to 10000

Color Temperature Range (K) (1)

Color Rendering Index (CRI) (1)

700

Recommended Operating Current (mA) (3)

1000

Maximum Rated Drive Current (mA)

3.2

Typical Forward Voltage (Vf) (4)

3.99

Maximum Forward Voltage (Vf) (4,6)

14.5

Thermal Resistance (C°/W) (1,5)

150

Maximum Junction Temperature (C°)

10 - 60

Operating Temperature Range (C°)

Up to 90%

Optical Efficiency

PMMI

Optic Material

15.6 x 11 x 8.20

Dimensions L x W x H (mm)

1.	Values based on 350mA and a Thermal Pad temperature of 25C.
2.	Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
3.	This is the maximum operating current that we recommend for this LED. Higher drive currents may be possible, but will require careful design of a suitable cooling system.
4.	At the recommended operating current.
5.	Typical thermal resistance from the LED Junction to the bottom of the PCB.
6.	This is the value we recommend you use for determining driver input voltage.

Detailed LED Technical Specifications
MCPCB Base Specifications
Assembly Drawing

Important Note About Stock: We usually only keep a small number of this assembly in stock, however we can produce virtually any quantity that you may require on demand. The lead time for larger quantities is typically 2 to 5 business days. Please contact us for lead times for orders above 1,000 pieces. There is no minimum order requirement for this assembly.

Do you need LEDs with a specific flux, color or forward voltage? Order this LED assembly in 1,000 piece increments and we will build it using LEDs from the same bin. We can also provide specific bin numbers. Contact us for availability.

Click here to learn more about LED binning.

Regular Price: $13.66

Qty in Stock :10
Availability : Additional stock - 2 to 3 days
Part No :: SR-04-WC100

Qty:

Additional Details

This SR-04-WC100 offers an ideal solution for any lighting need that requires a side emitting LED light in the smallest possible package and is suitable for:

Portable Lighting (flashlights/torch, bicycle)
Interior reading lights (car, bus,aircraft)
Task Lighting
Accent, Decorative lighting
An alternative to fiber optic lighting
Indoor/outdoor commercial and residential
Architectural Lighting

We recommend that this LED not be powered at more than 700mA unless special precautions are taken to ensure that the LED is properly cooled at higher driver currents. We offer a complete selection of current regulating drivers.

Related Products

700mA Ext Dimmable BuckPuck Driver With Leads

Pre-Cut Thermal Tape for 10mm Square Bases 10

25mm Square Alpha Heat Sink

700mA, Externally Dimmable, FlexBlock Driver

Regular Price: $15.99

Regular Price: $3.49

Regular Price: $4.97

Regular Price: $19.99

700mA, Externally Dimmable, BuckPuck DC Driver - With Leads

Pre-Cut, Thermal Adhesive Tape for 10mm Square Bases (10 Piece Sheet)

25mm Square x 15mm High Alpha Heat Sink - 15.5 °C/W

700mA, Externally Dimmable, FlexBlock Wide Range DC Driver - With Leads

Xitanium 120VAC 12W 700mA Driver

25mm Square Alpha Heat Sink

Regular Price: $39.83

Regular Price: $4.97

25mm Square x 15mm High Alpha Heat Sink - 17.8 °C/W

	Cool White (6500K), 7 LED 40mm Round Assembly - 1260 lm @ 700mA $71.78
	Cool White (6500K) Rebel LED, Pre-Mounted On A 20mm Tri-Star Base - 480 lm @ 700mA $25.10
	Cool White (6500K) Luxeon Rebel LED - 180 lm @ 700mA $7.80
	Saber 20mm Tri-Star Blank Aluminum MCPCB Base For Rebel LEDs $1.25
	Cool White (6500K) Rebel LED, Pre-Mounted On A 20mm Star Base - 180 lm @ 700mA $11.47
	Pre-Cut, Thermal Adhesive Tape for 20mm Hex Bases (12 Piece Sheet) $7.49
	Saber 20mm Star Blank Aluminum MCPCB Base For A Rebel LEDs $1.25
	Cool White (6500K) Rebel LED, Pre-Mounted On A 10mm Square Base - 220 lm @ 700mA $8.82
	Pre-Cut, Thermal Adhesive Tape for 10mm Square Bases (10 Piece Sheet) $3.49