Luxeon Star LEDs
Rebel Star LEDs
Rebel Tri-Star LEDs
Rebel 10mm Square LEDs
Rebel Side Emitting LEDs
Rebel 7 LED Round Assemblies
Rebel Star/O LEDs
Rebel 25mm Round LEDs
Rebel Quad LED Assemblies
Rebel LED Optics
LED Power Drivers
Rebel LED Mounting Bases
Hong Kong Dollars
New Zealand Dollar
South African Rand
South Korean Won
(Your shopping cart is empty)
Rebel Tri-Star LEDs
Saber 20mm Tri-Star LEDs
Red-Orange (617 nm) Rebel LED, Pre-Mounted On A 20mm Tri-Star Base - 255 lm @ 700mA
The MR-H0040-20T is being discontinued. Our
CoolBase LED assembly may be a suitable alternative.
We will continue to offer the MR-H0040-20T until existing stock has run out.
Exclusive to Luxeon Star LEDs, three
Red-Orange Rebel LEDs are pre-soldered to our
Saber 20mm Tri LED
hex MCPCB base. The Saber base makes it easy to mount the LEDs to a suitable heat sink and to work with the LEDs using standard bench top soldering and hand tools. The LEDs can be powered in either parallel (single) or series (triple). The MR-H0040-20T can be ordered in any quantity with quantity discounts available.
Need to be able to mount three different color LEDs to the same base? We also offer a customizable version of this
LED assembly here
Lumens @ 350mA
Lumens @ 700mA
Lumens per Watt
610 nm to 620 nm
Color Wavelength Range
Maximum Rated Drive Current
Typical Forward Voltage
Maximum Junction Temp
20mm x 20mm x 3.5mm
LED Part Number
Values based on 350mA and a Thermal Pad temperature of 25C.
LEDs connected in series.
Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
Typical thermal resistance from the LED Junction to the bottom of the aluminum base.
Important Note About Stock:
We usually only keep a small number of this assembly in stock. However, we can produce virtually any quantity that you may require on demand. The lead time for larger quantities is typically 3 to 5 business days. Please contact us for lead times for orders above 1,000 pieces. There is no minimum order requirement for this assembly.
Do you need LEDs with a specific flux, color or forward voltage? Order this LED assembly in 350 piece increments and we will build it using LEDs from the same bin. We can also provide specific bin numbers.
to learn more about LED binning.
Qty in Stock
Once we are out of stock, this item will no longer be available
Part No :
Product Videos & Renderings
The Saber 20mm Tri-LED hex base used in this assembly is designed to precisely mount and position a single Carclo 20mm Tri-Star optic over the LED using RTV or optical adhesive. We offer a complete selection of
Carclo lenses here
To fasten this LED assembly to a heat sink we recommend our
pre-cut Bond-Ply 100
pressure sensitive, double sided thermal tape. Pads are cut into 20mm hexagonal shapes, making mounting the LED to a heat sink fast and easy.
Detailed LED Technical Specifications
MCPCB Base Specifications
The MR-H0040-20T offers:
120 lumens of Red-Orange light at 350mA and 255 lumens at 700mA
A selection of compatible
20mm tri-optics & accessories
Can be soldered with standard hand tools
No minimum order requirements
Quantity discounts available
RoHS compliant and lead free
Connecting The Rebel Tri-Star LED For Triple (Series) Operation
Connecting The Rebel Tri-Star LED For RGB Operation
If you have a high bandwidth connection to the internet, you can watch this video in High Quality or High Definition by selecting 480p or 720p from the toolbar
on the bottom of the video player. You can also watch this video at Full Screen by clicking on the
button on the video control bar.
Having trouble playing the video?
If the video starts and stops a lot try the following:
Try pausing the video for a minute or two by clicking the pause button and then starting it again. This will "buffer" the video to your computer for smoother playback.
If you still have problems, click on the video to go to YouTube. Sometimes videos will play better directly from YouTube.
If the video will not play at all, be sure you have the latest Flash player from Adobe. You can download the latest version
350mA Non-Dimmable PowerPuck Driver With Leads
700mA Non-Dimmable PowerPuck Driver With Leads
Carclo 27° Frosted Tri-LED Optic With Holder
350mA Int Dimmable BuckPuck Driver PCB Mount
700mA Int Dimmable BuckPuck Driver PCB Mount
Carclo 41° x 19° Elliptical Tri-LED Optic
Carclo 18° Tri-LED Optic With Integrated Holder
Pre-Cut Thermal Tape for 20mm hex Bases 12
Carclo 44° Frosted Tri-LED Optic With Holder
Luxeon Star LEDs
Terms & Conditions
Returns & Refunds