Luxeon Star LEDs
Rebel Star LEDs
Rebel Tri-Star LEDs
Rebel 10mm Square LEDs
Rebel Side Emitting LEDs
Rebel 7 LED Round Assemblies
Rebel Star/O LEDs
Rebel 25mm Round LEDs
Rebel Quad LED Assemblies
Rebel LED Optics
LED Power Drivers
Rebel LED Mounting Bases
Hong Kong Dollars
New Zealand Dollar
South African Rand
South Korean Won
(Your shopping cart is empty)
Red-Orange (617 nm) Luxeon Rebel LED - 85 lm @ 700mA
The LXML-PH01-0040 is being discontinued. The
may be a suitable alternative.
We will continue to offer the LXML-PH01-0040 until existing stock has run out.
The LXML-PH01-0040 Luxeon
Rebel high power LED gives you the ultimate in design flexibility, with an extremely small footprint and the best operational specifications available anywhere!
Lumens @ 350mA
Lumens @ 700mA
Lumens per Watt
610 nm to 620 nm
Maximum Rated Drive Current
Typical Forward Voltage
Max Junction Temperature
4.5mm x 3mm x 2mm
Values based on 350mA and a Thermal Pad temperature of 25C.
Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
Typical Junction to Pad thermal resistance.
Do you need LEDs with a specific flux, color or forward voltage? Order this LED in 1,000 piece increments and we will ship full reels of LEDs from the same bin. We can also provide specific bin numbers.
to learn more about LED binning.
Important Note About Stock
: The Qty in Stock value shown below is only a small percentage of the stock we typically have on hand in our warehouse. If you need a higher quantity of Rebel LEDs than what is shown below, please contact us. We may have more stock available for immediate shipping.
Qty in Stock
Once we are out of stock, this item will no longer be available
Part No :
Rebel LEDs are designed to be handled using automated pick and place equipment and soldered using reflow soldering techniques, so for hobbyists, R&D and lower to medium production volume users we also offer the LXML-PH01-0040 pre-mounted onto
Detailed Technical Specifications
LXML-PH01-0040 Rebel offers:
Flexibility to power the LED with input currents from 350mA to 1000mA
Easy thermal management with an electrically isolated thermal pad
Very long life with 70% of light output after 50,000 hours of operation
An extremely small footprint at 0.12" x 0.18" (3mm x 4.5mm)
Standard SMD manufacturing techniques
Lead and mercury free, RoHS and REACH Compliant
The LXML-PH01-0040 emits a lambertian beam pattern with a typical viewing angle of 120°. You can further shape the light output of this LED using our selection of
secondary optics & accessories
We recommend that this LED not be powered with more than 700mA unless special precautions are taken to ensure that the LED is properly cooled at higher driver currents. We offer a complete selection of
current regulating drivers
Carclo 35° Frosted 20mm Optic - No Holder
700mA Ext Dimmable BuckPuck Driver With Leads
700mA Non-Dimmable PowerPuck Driver With Leads
Carclo Fiber Coupling 20mm Optic - No Holder
Luxeon Star LEDs
Terms & Conditions
Returns & Refunds
- Powered By