Free Shipping Offer Details

Red Luxeon Rebel LEDs Deep Red Luxeon Rebel LEDs Red-Orange Luxeon Rebel LEDs Amber Luxeon Rebel LEDs Green Luxeon Rebel LEDs Cyan Luxeon Rebel LEDs Blue Luxeon Rebel LEDs Royal Blue Luxeon Rebel LEDs 2700K Luxeon Rebel LEDs 3000K Luxeon Rebel LEDs 3100K Luxeon Rebel LEDs 3500K Luxeon Rebel LEDs 4000K Luxeon Rebel LEDs 4100K Luxeon Rebel LEDs 5000K Luxeon Rebel LEDs 5650K Luxeon Rebel LEDs 6500K Luxeon Rebel LEDs Luxeon Star carries a wide variety of colors and white LEDs


(Your shopping cart is empty)

  Home > Discontinued Products > Rebel Tri-Stars >

  Royal-Blue (447.5 nm) Rebel LED, Pre-Mounted On A 20mm Tri-Star Base - 1875mW @ 700mA
Royal-Blue (447.5 nm) Rebel LED, Pre-Mounted On A 20mm Tri-Star Base - 1875mW @ 700mA
 
The MR-R0350-20T has been discontinued.

Our SR-03-R0425 CoolBase LED assembly may be a suitable alternative.

Exclusive to Luxeon Star LEDs, three LXML-PR01-0350 Royal-Blue Rebel LEDs are pre-soldered to our Saber 20mm Tri LED hex MCPCB base. The Saber base makes it easy to mount the LEDs to a suitable heat sink and to work with the LEDs using standard bench top soldering and hand tools. The LEDs can be powered in either parallel (single) or series (triple). The MR-R0350-20T can be ordered in any quantity with quantity discounts available.

Need to be able to mount three different color LEDs to the same base? We also offer a customizable version of this LED assembly here.

Royal-BlueColor
1050mWRadiometric Power @ 350mA (1)
1875mWRadiometric Power @ 700mA (1)
447.5 nmDominent Wavelength (2)
440 nm to 460 nmColor Wavelength Range (2)
120°Beam Angle (4)
700 mARecommended Max Current (5)
1000 mAMaximum Rated Drive Current
9.15 VfTypical Forward Voltage (2, 3)
14.5 C°/WThermal Resistance (2,6)
150° CMaximum Junction Temp
20mm x 20mm x 3.5mmDimensions (L/W/H)
LXML-PR01-0350LED Part Number

1. As Royal Blue LEDs produce near UV light, LEDs are rated by radiometric power (mW) instead of lumens.
2.Values based on 350mA and a Thermal Pad temperature of 25C.
3.LEDs connected in series.
4.Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
5.This is the maximum operating current that we recommend for this LED. Higher drive currents are possible, but requires careful design of a suitable cooling system.
6.Typical thermal resistance from the LED Junction to the bottom of the aluminum base.

Important Note About Stock: We usually only keep a small number of this assembly in stock. However, we can produce virtually any quantity that you may require on demand. The lead time for larger quantities is typically 3 to 5 business days. Please contact us for lead times for orders above 1,000 pieces. There is no minimum order requirement for this assembly.

This assembly is produced using non-binned LEDs selected from general inventory.
Regular Price: $23.57

Qty in Stock : (No Stock)
Availability : No Longer Available
Part No :: MR-R0350-20T
Qty:

Additional Details Additional Information Product Videos & Renderings
 
The Saber 20mm Tri-LED hex base used in this assembly is designed to precisely mount and position a single Carclo 20mm Tri-Star optic over the LED using RTV or optical adhesive. We offer a complete selection of Carclo lenses here.

To fasten this LED assembly to a heat sink we recommend our pre-cut Bond-Ply 100 pressure sensitive, double sided thermal tape. Pads are cut into 20mm hexagonal shapes, making mounting the LED to a heat sink fast and easy.

 Documentation

Related Products
Carclo 18 Tri-LED Optic With Integrated Holder Pre-Cut Thermal Tape for 20mm hex Bases 12 350mA Non-Dimmable PowerPuck Driver With Leads Carclo 44 Frosted Tri-LED Optic With Holder
Regular Price: $2.36
Regular Price: $7.49
Regular Price: $18.99
Regular Price: $3.18
Carclo 18° Tri-LED Optic With Integrated Holder Pre-Cut, Thermal Adhesive Tape for 20mm Hex Bases (12 Piece Sheet) 350mA, Non-Dimmable, PowerPuck DC Driver - With Leads Carclo 44° Frosted Tri-LED Optic With Integrated Holder
350mA Int Dimmable BuckPuck Driver PCB Mount Carclo 41 x 19 Elliptical Tri-LED Optic 700mA Non-Dimmable PowerPuck Driver With Leads Carclo 27 Frosted Tri-LED Optic With Holder
Regular Price: $17.99
Regular Price: $2.16
Regular Price: $18.99
Regular Price: $3.18
350mA, Internally Dimmable, BuckPuck DC Driver - PCB Mount Carclo 41° x 19° Elliptical Tri-LED Optic With Integrated Holder 700mA, Non-Dimmable, PowerPuck DC Driver - With Leads Carclo 27° Frosted Tri-LED Optic With Integrated Holder
700mA Int Dimmable BuckPuck Driver PCB Mount
Regular Price: $17.99
700mA, Internally Dimmable, BuckPuck DC Driver - PCB Mount

Luxeon Star LEDs

 About Us
 Privacy Policy
 Terms & Conditions
 Returns & Refunds
 Shipping Policy

© Quadica Developments Inc.Built with Volusion