Free Shipping Offer Details On orders over $200 to the USA and Canada.
Click for details.

Deep Red Luxeon Rebel LEDs Red Luxeon Rebel LEDs Red-Orange Luxeon Rebel LEDs Amber Luxeon Rebel LEDs Lime Luxeon Rebel LEDs Green Luxeon Rebel LEDs Cyan Luxeon Rebel LEDs Blue Luxeon Rebel LEDs Royal Blue Luxeon Rebel LEDs 2700K Luxeon Rebel LEDs 3000K Luxeon Rebel LEDs 3500K Luxeon Rebel LEDs 4000K Luxeon Rebel LEDs 4100K Luxeon Rebel LEDs 5000K Luxeon Rebel LEDs 5650K Luxeon Rebel LEDs 6500K Luxeon Rebel LEDs Luxeon Star carries a wide variety of colors and white LEDs

PC Amber (591nm) LUXEON Rebel LED on a SinkPAD-II 23mm Round Base - 300 lm @ 350mA

 
review 0 Review(s)
0
PC Amber (591nm) LUXEON Rebel LED on a SinkPAD-II 23mm Round Base - 300 lm @ 350mA
Tell a friend Tell a friend
Review this item Review this item
The SP-08-A5 LED assembly features 4 LXM2-PL01-0000 PC Amber LUXEON Rebel LEDs soldered to a SinkPAD-II 23mm Round base.

The SinkPAD-II uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, lumens output and overall reliability.
Part Number : SP-08-A5
Quantity Price
10 - 24 $30.29
25 - 49 $28.69
50 - 99 $27.10
100 - 249 $25.50
250 - 999 $23.91
1000+ $22.32
Quantity
Additional non-stocked PC Amber SinkPAD-II Round assemblies can be ordered here.
 
The LEDs on this assembly can be connected and powered in series or singly for full control of each LED making the SP-08-A5 ideally suited for:
  • Flashlights
  • Bicycle Lights
  • Diving Lights
  • Color Tuned Lighting
  • Lightsabers
  • Spot lighting
  • Task Lamps
  • Fiber Optic Illuminators
Need four different color LEDs mounted to this base? We offer a customizable version here.
Specifications
 
LED Color PC Amber
Lumens @ 350mA 300 lm
Lumens @ 700mA 528 lm
Efficacy @ 350mA 47 Lm/W (From datasheet)
Efficacy @ 700mA 59 Lm/W (From datasheet)
Typical Wavelength (1) 591 nm
Wavelength Range (1) 588 to 592 nm
Beam Angle (2) 120°
Recommended Operating Current (3) 350 mA
Maximum Rated Drive Current 700 mA
Typical Forward Voltage (4) 12.2 Vf
Maximum Forward Voltage (4,6) 14.04 Vf
Thermal Resistance (1,5) 10.7 C°/W
Max Recommended Junction Temp 130 °C
Operating Temperature Range -40 to 110 °C
Dimensions L x W x H 23 x 23 x 3.7 mm
  1. Values based on 350mA and a Thermal Pad temperature of 25 °C.
  2. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
  3. This is the maximum operating current that we recommend for this LED. Higher drive currents may be possible, but will require careful design of a suitable cooling system.
  4. At 350mA.
  5. Typical thermal resistance from the LED Junction to the bottom of the board.
  6. This is the value we recommend you use for determining driver input voltage.
Download Center
SP-08 Datasheet SP-08 Dimensional Drawing SP-08 STEP 3D Model File
LXM2-PL01-0000 Datasheet SP-08 IGES 3D Model File  
Additional Ordering Information

The SP-08-A5 can be ordered in any quantity with quantity discounts available.

If you order more than one piece of this part, pieces may be shipped as part of a routed panel with v-scored tabs for separating the parts from the panel.

Important Note About Stock: We usually only keep a small number of this part in stock. However, we can produce virtually any quantity that you may require on demand. Please contact us for lead times for orders above 300 pieces.

Binned LEDsDo you need LEDs with a specific flux, color or forward voltage? Order this part in 300 piece increments and we will build it using LEDs from the same bin. We can also provide specific bin numbers. Contact us for availability.

Click here to learn more about LED binning.

Thermal Management

SP-08-A5 LED assemblies must be operated to ensure that the junction temperature of the LEDs are kept well below the maximum ratings as specified in the LXM2-PL01-0000 datasheet. A heat sink must always be used when operating this assembly. The size of the heat sink will depend on the ambient temperature and the current that is used to power the LEDs. Bench testing that we have conducted with a SP-08-N4 assembly powered at 700mA in an open air environment and an ambient temperature of 25°C has indicated that a heat sink with a thermal rating of 10 C°/W or lower should be adequate. However, you will need to perform your own testing and analysis to determine if this size of heat sink will be suitable for your application.

The SP-08-A5 must be fastened to the heat sink using a thermal interface material such as our pre-cut Bond-Ply 100 pressure sensitive, double sided thermal tape or Arctic Silver thermal adhesive. Before fastening the assembly to the heat sink, ensure that the two mating surfaces are perfectly flat and clean in order to maximize heat transfer to the the sink. This assembly is not designed to be fastened with screws.

Connection Diagrams
Quad LED Series Operation
Quad LED Single Operation
Support
LED Knowledgebase
service@luxeonstar.com
Phone: 1-347-223-5077
Fax: 1-403-775-4020
Legal & Business Information
Privacy Policy
Terms and Conditions
Returns & Refund Policy
Shipping Policy
Payment Options
About Us
Product Index
Category Index
We Accept
Visa Mastercard American Express Pay with Paypal Bitcoin Wire Transfers Check Terms
 

ABOUT SSL CERTIFICATES
 
Currency conversion software
Copyright Luxeon Star LEDs. All Rights Reserved. eCommerce Software by 3dcart.