Free Shipping Offer Details On orders over $200 to the USA and Canada.
Click for details.

Deep Red Luxeon Rebel LEDs Red Luxeon Rebel LEDs Red-Orange Luxeon Rebel LEDs Amber Luxeon Rebel LEDs Lime Luxeon Rebel LEDs Green Luxeon Rebel LEDs Cyan Luxeon Rebel LEDs Blue Luxeon Rebel LEDs Royal Blue Luxeon Rebel LEDs 2700K Luxeon Rebel LEDs 3000K Luxeon Rebel LEDs 3500K Luxeon Rebel LEDs 4000K Luxeon Rebel LEDs 4100K Luxeon Rebel LEDs 5000K Luxeon Rebel LEDs 5650K Luxeon Rebel LEDs 6500K Luxeon Rebel LEDs Luxeon Star carries a wide variety of colors and white LEDs

Royal Blue (447.5 nm) Rebel, Pre-Mounted On A 20mm Tri-Star Base - 1575mW @ 700mA

 
review 0 Review(s)
0
Royal Blue (447.5 nm) Rebel, Pre-Mounted On A 20mm Tri-Star Base - 1575mW @ 700mA
Tell a friend Tell a friend
Review this item Review this item
The MR-R0275-20T has been discontinued. The SP-03-V4 may be a suitable replacement.
Part Number : MR-R0275-20T
Specifications
 
LED Color Royal-Blue
mW @ 350mA (1) 825 mW
mW @ 700mA (1) 1575 mW
Radian Efficacy @ 350mA
Radian Efficacy @ 700mA
Typical Wavelength (2) 447.5 nm
Wavelength Range (2) 440 to 460 nm
Beam Angle (2) °
Recommended Operating Current (3,4) mA
Maximum Rated Drive Current 1000 mA
Typical Forward Voltage (5) 9.45 Vf
Maximum Forward Voltage (5,7) Vf
Thermal Resistance (2,6) C°/W
Max Recommended Junction Temp °C
Operating Temperature Range -40 to 135 °C
Dimensions L x W x H 20 x 20 x 5 mm
  1. As royal-blue LEDs are close to the UV range, LEDs are rated by radiometric power (mW) instead of lumens.
  2. Values based on 350mA and a Thermal Pad temperature of 25C.
  3. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
  4. This is the maximum operating current that we recommend for this LED. Higher drive currents may be possible, but will require careful design of a suitable cooling system.
  5. At the recommended operating current.
  6. Typical thermal resistance from the LED Junction to the bottom of the FR4 board.
  7. This is the value we recommend you use for determining driver input voltage.
* Results will vary depending on the quality of the dielectric material used in the MCPCB base.
Download Center
Detailed LED Technical Specifications Assembly Drawing
MCPCB Base Specifications  
Additional Information

The MR-R0275-20T can be ordered in any quantity with quantity discounts available.

If you order more than one piece of this part, pieces may be shipped as part of a routed FR4 panel with v-scored tabs for separating the parts from the panel.

Important Note About Stock: We usually only keep a small number of this part in stock. However, we can produce virtually any quantity that you may require on demand. Please contact us for lead times for orders above 1,000 pieces.

Binned LEDsDo you need LEDs with a specific flux, color or forward voltage? Order this part in 1,000 piece increments and we will build it using LEDs from the same bin. We can also provide specific bin numbers. Contact us for availability.

Click here to learn more about LED binning.

Support
LED Knowledgebase
service@luxeonstar.com
Phone: 1-347-223-5077
Fax: 1-403-775-4020
Legal & Business Information
Privacy Policy
Terms and Conditions
Returns & Refund Policy
Shipping Policy
Payment Options
About Us
Product Index
Category Index
We Accept
Visa Mastercard American Express Pay with Paypal Bitcoin Wire Transfers Check Terms
 

ABOUT SSL CERTIFICATES
 
Currency conversion software
Copyright Luxeon Star LEDs. All Rights Reserved. eCommerce Software by 3dcart.