Free Shipping Offer Details On orders over $200 to the USA and Canada.
Click for details.

Deep Red Luxeon Rebel LEDs Red Luxeon Rebel LEDs Red-Orange Luxeon Rebel LEDs Amber Luxeon Rebel LEDs Lime Luxeon Rebel LEDs Green Luxeon Rebel LEDs Cyan Luxeon Rebel LEDs Blue Luxeon Rebel LEDs Royal Blue Luxeon Rebel LEDs 2700K Luxeon Rebel LEDs 3000K Luxeon Rebel LEDs 3500K Luxeon Rebel LEDs 4000K Luxeon Rebel LEDs 4100K Luxeon Rebel LEDs 5000K Luxeon Rebel LEDs 5650K Luxeon Rebel LEDs 6500K Luxeon Rebel LEDs Luxeon Star carries a wide variety of colors and white LEDs

ANSI White (3045K) LUXEON Rebel LED, Mounted on a 25mm Round CoolBase - 85 lm @ 350mA

 
review 0 Review(s)
0
ANSI White (3045K) LUXEON Rebel LED, Mounted on a 25mm Round CoolBase - 85 lm @ 350mA
Tell a friend Tell a friend
Review this item Review this item
The SR-06-3000-85 has been discontinued. The SR-06-3000-303 may be a suitable replacement.
Part Number : SR-06-3000-85

In addition to being compatible with nearly all flat bottomed, single LED optics, the SR-06-3000-85 is 100% compatible with all Carclo Hemispherical Bubble Optics - a series of extremely wide angle lenses that can evenly distribute the light generated by the assembly by 120° to 180°.

Specifications
 
LED Color ANSI White
Lumens @ 350mA 85 lm
Efficacy @ 350mA 81 Lm/W (Calculated)
Typical Color Temperature (1) 3045K
Color Temperature Range (1) 2870 to 3220K
Color Rendering Index (1) 85 CRI
Beam Angle (2) 120°
Recommended Operating Current (3) 350 mA
Maximum Rated Drive Current 700 mA
Typical Forward Voltage (4) 3 Vf
Maximum Forward Voltage (4,6) 3.5 Vf
Thermal Resistance (1,5) 11.5 C°/W
Max Recommended Junction Temp 135 °C
Operating Temperature Range -40 to 135 °C
Dimensions L x W x H 25 x 25 x 5 mm
  1. Values based on 350mA and a Thermal Pad temperature of 25C.
  2. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
  3. This is the maximum operating current that we recommend for this LED. Higher drive currents may be possible, but will require careful design of a suitable cooling system.
  4. At the recommended operating current.
  5. Typical thermal resistance from the LED Junction to the bottom of the FR4 board.
  6. This is the value we recommend you use for determining driver input voltage.
* Results will vary depending on the quality of the dielectric material used in the MCPCB base.
Download Center
SR-06-3000-85 Datasheet SR-06 Dimensional Drawing
LXM8-PW30 datasheet  
Additional Information

The SR-06-3000-85 can be ordered in any quantity with quantity discounts available.

If you order more than one piece of this part, pieces may be shipped as part of a v-scored panel.

Important Note About Stock: We usually only keep a small number of this part in stock. However, we can produce virtually any quantity that you may require on demand. Please contact us for lead times for orders above 1,000 pieces.

Binned LEDsDo you need LEDs with a specific flux, color or forward voltage? Order this part in 1,000 piece increments and we will build it using LEDs from the same bin. We can also provide specific bin numbers. Contact us for availability.

Click here to learn more about LED binning.

Support
LED Knowledgebase
service@luxeonstar.com
Phone: 1-347-223-5077
Fax: 1-403-775-4020
Legal & Business Information
Privacy Policy
Terms and Conditions
Returns & Refund Policy
Shipping Policy
Payment Options
About Us
Product Index
Category Index
We Accept
Visa Mastercard American Express Pay with Paypal Bitcoin Wire Transfers Check Terms
 

ABOUT SSL CERTIFICATES
 
Currency conversion software
Copyright Luxeon Star LEDs. All Rights Reserved. eCommerce Software by 3dcart.