Home > LED Power Drivers > BuckPucks > Wired

700mA Non-Dimmable BuckPuck AC Driver - With Leads

The 3023-A-N-700 BuckPuck is a 700mA, 5-24 AC, current regulating driver designed for powering all types of high power LED modules and arrays. A fast response, current-sensing circuit makes it ideal for LED flashing or strobing.

This driver features 6" 24AWG leads, and requires no external current limiting resistors or heat sinking.

Part Number : 3023-A-N-700

Quantity	Price
10 - 24	$14.75
25 - 49	$14.30
50 - 99	$13.84
100 - 249	$13.38
250 - 999	$12.93
1000+	$12.17

Quantity discount pricing will be automatically
applied when you add this part to the cart.

Quantity

Product Attributes
Output Current	700mA
Minimum Input Voltage	5VRMS
Maximum Input Voltage	24VRMS
Output Voltage	32VDC
(1)Input Margin	4VRMS
Dimmable	No
Efficiency	95%
Output Tolerance	±10
Maximum Flash Frequency	10kHz
Minimum Strobe Pulse Width	50 µs
(2)Output Rise Time	<10 µs
(2)Output Fall Time	< 350 µs
Operating Temperature Range	-40 to +80°C
Weight	8.1 g
Dimensions L x W x H	21 x 21 x 11 mm
Due to the nature of a buck regulator, the input voltage to the driver must always be higher than the total forward voltage drop of all series connected LEDs. For example, if you have a series connected string of six LEDs where each LED has an average forward drop of 3.5V, the required minimum input voltage would be 25VAC. (3.5 x 6 + 4) A 26VAC power supply would be a good choice for this application. The actual value will vary greatly depending on the input and/or output voltages. Value shown is for Vin = 24VDC VOUTt=20VDC LED load. Actual values will be smaller in most applications. This information is for reference only. Refer to the manufacturers datasheet for official specifications.

Documents & Media
Datasheets	3023-A-N-700 Datasheet
Application Notes	LED Drivers And Capacitor Reliability Flashing LEDs with BuckPuck and BoostPuck Drivers