Home > Rebel 23mm Quad LEDs > SP-08 Color Mixer

Your Choice Of Any 4 Rebel LEDs Soldered To A SinkPAD-II Quad Base

Have four different Rebel LEDs mounted to the same SinkPAD-II™ Quad base. You can order one or order thousands, there is no minimum order requirement or extra fees.

The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, lumens output and overall reliability.

Price Each

$5.25

Availability

Built To Order - Allow 1 to 2 weeks

Part Number : SP-08

Quantity	% Discount
10 - 24	5%
25 - 49	10%
50 - 99	15%
100 - 249	20%
250 - 999	25%
1000+	30%

Quantity discount pricing will be automatically
applied when you add this part to the cart.

Quantity

Select the LEDs To Be Mounted

Mounting Base (SP-08A)

The LEDs on this module can be connected and powered in series or parallel for full control of each LED making the ideally suited for:

Flashlights
Bicycle Lights
Diving Lights
Color Tuned Lighting

Lightsabers
Spot lighting
Task Lamps
Fiber Optic Illuminators

Important Notes About Ordering The SP-08 Color Mixer

Orders for custom color mixers cannot be canceled or altered once your order has been reviewed and submitted to production! So be very sure that you have selected the correct LEDs before you submit your order! Custom color mixers are subject to special order terms as detailed here.
Before you order cyan LEDs, please be sure to read this important information about color variations.
Bases are configured to power each LED separately for controlled color mixing, however you can easily convert the assembly to power all four LEDs in series with three solder dots. See the connection diagrams below.

Documents & Media
Datasheets	SP-08 Module Datasheet LUXEON Rebel Color Line Datasheet LUXEON Rebel PC Amber Datasheet LUXEON Rebel ES Whites Datasheet LUXEON Rebel General Purpose Whites Datasheet LUXEON Rebel Plus Whites Datasheet
CAD & Drawings	SP-08 Module Dimensional Drawing SP-08 Module STEP 3D Model File SP-08 Module IGES 3D Model File
Lumileds Supporting Documents	LUXEON Rebel Thermal Measurement Guidelines Photobiological Safety Report (Eye Safety)

Thermal Management

The SinkPAD-II SP-08 Quad LED module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating as specified in the LED documentation published by Lumileds.

For optimal cooling, we recommend that the module be mounted to a suitable finned heat sink (aluminum or copper) that is exposed to open air. The module can be mounted to the heat sink in one of two ways:

Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean in order to maximize heat transfer to the the sink.

Mechanical fasteners are not recommended for this module.

The bottom of the LED module is electrically neutral, so it is not necessary to electrically isolate the base from the cooling surface.

Connection

Optic Compatibility

The SinkPAD-II SP-08 Quad LED module is compatible with all Khatod PL115 series of optics

Additional Information

The SP-08 can be ordered in any quantity with quantity discounts available.

If you order more than one piece of this part, pieces may be shipped as part of a v-scored panel.

Binned LEDs Do you need LED modules with a specific flux, color or forward voltage? Order this part in 1,000 piece increments and we will supply it using LEDs from the same bin. We can also provide specific bin numbers. We can also provide specific bin numbers. Contact us for availability.

Click here to learn more about LED binning.