Free Shipping Offer Details On orders over $200 to the USA and Canada.
Click for details.
October 23, 2020
We are in full production and accepting orders.
Expect typical production times.
Shipping may take longer than usual.

Cyan (505nm) LUXEON Rebel LED; Mounted on a 25mm Square CoolBase - 122 lm @ 700mA

Cyan (505nm) LUXEON Rebel LED; Mounted on a 25mm Square CoolBase - 122 lm @ 700mA

Not recommended for new designs.

The SR-12-E0070 high power LED lighting assembly has been specifically designed to work as a drop-in replacement for the LXHL-NE98 Luxeon Star/O that is no longer manufactured by Philips Lumileds. This assembly is built with a Fraen FLP-N4-RE-HRF optic and has a near identical form factor to the original Star/O and can typically be cooled and powered using the same heat sink and driver used for the LXHL-NE98.
Quantity Price
10 - 24 $11.31
25 - 49 $10.71
50 - 99 $10.12
100 - 249 $9.52
250 - 999 $8.93
1000+ $8.33
LED Color Cyan
Lumens @ 350mA 76 lm
Lumens @ 700mA 122 lm
Efficacy @ 350mA 75 Lm/W (From datasheet)
Efficacy @ 700mA 51 Lm/W (From datasheet)
Typical Wavelength (1) 505 nm
Wavelength Range (1) 490 to 515 nm
Beam Angle (2)
Recommended Operating Current (3) 700 mA
Maximum Rated Drive Current 1000 mA
Typical Forward Voltage (4) 2.9 Vf
Maximum Forward Voltage (4,6) 3.51 Vf
Thermal Resistance (1,5) 11.5 C°/W
Max Recommended Junction Temp 150 °C
Operating Temperature Range -40 to 135 °C
Dimensions L x W x H 25 x 25 x 15 mm
  1. Values based on 350mA and a Thermal Pad temperature of 25 °C.
  2. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
  3. This is the maximum operating current that we recommend for this LED. Higher drive currents may be possible, but will require careful design of a suitable cooling system.
  4. At 350mA.
  5. Typical thermal resistance from the LED Junction to the bottom of the FR4 board.
  6. This is the value we recommend you use for determining driver input voltage.
* Results will vary depending on the quality of the dielectric material used in the MCPCB base.
Download Center
SR-12-E0070 Datasheet SR-12 Dimensional Drawing
LXML-PE01-0070 datasheet  
Additional Information

The SR-12-E0070 can be ordered in any quantity with quantity discounts available.

If you order more than one piece of this part, pieces may be shipped as part of a v-scored panel

Important Note About Stock: We usually only keep a small number of this part in stock. However, we can produce virtually any quantity that you may require on demand. Please contact us for lead times for orders above 1,000 pieces.

Binned LEDsDo you need LEDs with a specific flux, color or forward voltage? Order this part in 1,000 piece increments and we will build it using LEDs from the same bin. We can also provide specific bin numbers. Contact us for availability.

Click here to learn more about LED binning.

LED Knowledgebase
[email protected]
Phone: 1-347-223-5077
Fax: 1-403-775-4020
Legal & Business Information
Compliance Documents
Privacy Policy
Terms and Conditions
Returns & Refund Policy
Shipping Policy
Payment Options
About Us
Product Index
Category Index
We Accept
Visa Mastercard American Express Pay with Paypal Bitcoin Wire Transfers Check Terms
Currency conversion software

Copyright Quadica Developments Inc. All Rights Reserved.
QUADICA® is a registered trademark of Quadica Developments Inc.
Commerce Software by 3dcart.