0
$ USD
  • $ USD
  • $ CAD
  • € EUR
  • £ GBP
  • $ AUD
  • ₩ KRW
  • ¥ JPY
  • ₪ ILS
  • ¥ CNY
  • kr SEK
  • CHF CHF
  • kr NOK
  • RM MYR
  • $ SGD

Holiday Shipping & Production Dates For 2023

0
Request Quote

Holiday Shipping & Production Dates For 2023

On August 20, 2023, the Luxeon Star LEDs website transitioned to a new hosting service. If you're a returning customer, you will need to reset your password to maintain your account security. You can reset your password here.

ANSI White (3500K) LUXEON Rebel Plus LED; Mounted on a 10mm Square Saber – 172 lm @ 700mA

Regular Price: $9.03 /ea

The MR-3500-353-10S Rebel Square LED assembly features a single LX18-P135-3 ANSI White, LUXEON Rebel Plus pre-soldered to our Saber 10mm Square MCPCB base. The aluminium base makes it easy to mount the LED to a suitable heat sink and to work with the LED using standard benchtop soldering and hand tools.

MR-3500-353-10S

Discount Pricing

Built To Order Lead Time
2-8 Days
Product Status
Built to order
Minimum order quantity
1
Manufacturer
Quadica Developments
Quantity Unit Price
1 - 9 $9.03
10 - 24 $8.58
25 - 49 $8.13
50 - 99 $7.68
100 - 249 $7.22
250 - 999 $6.77
1000 + $6.32
Built To Order Lead Time
2-8 Days
Product Status
Built to order
Minimum order quantity
1
Manufacturer
Quadica Developments
Datasheet

Discount Pricing

Quantity Unit Price
1 - 9 $9.03
10 - 24 $8.58
25 - 49 $8.13
50 - 99 $7.68
100 - 249 $7.22
250 - 999 $6.77
1000 + $6.32

Compatible Products

App Notes

Specs

Drivers

Optics

Cooling

Documents & Compliance

Thermal Management

The MR-3500-353-10S Saber LED module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating specified in the Lumileds datasheet.

We recommend that the module be mounted to an aluminum or copper finned heatsink exposed to open air for optimal cooling. The module can be mounted to the heat sink in one of two ways:

Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean to maximize heat transfer to the heatsink. Mechanical fasteners are not recommended for this module.

The bottom of the LED module is electrically neutral, so it is unnecessary to electrically isolate the base from the cooling surface.

Stock

We usually keep a small number of this part in stock. However, we can produce virtually any quantity you require on demand. Please get in touch with us for lead times for orders above 1,000 pieces.

LED Binning

Order quantities less than 1,000 pieces are produced from unbinned stock (cut strips). We can supply binned LED modules (built from full reels)) If you order in 1,000+ quantities, please contact us for binning details.

You can learn more about LED binning here.

LED ColorANSI White
Recommended Operating Current350 mA
Maximum Rated Drive Current1000 mA
Maximum Pulse Current1000 mA
Typical Forward Voltage2.8 Vf
Maximum Forward Voltage3 Vf
Lumens @ 350 mA98 lm
Lumens @ 700 mA172 lm
Typical Wavelength3500 K
Color Rendering Index80 CRI
Beam Angle120°
Typical Forward Voltage2.8 Vf
Thermal Resistance15 °C/W
Maximum Recommended Junction Temp150 °C
Operating Temperature Range-40 to 135 °C
Dimensions (L x W x H)10 x 10 x 5 mm
Weight0.2 g
Refer to the product datasheets for complete specifications.

A current-regulating LED driver is required between the power supply and the LED module to ensure that the LED is not powered above its maximum current rating. You can learn more about powering high-power LED modules here.

All drivers listed here are 100% compatible with the MR-3500-353-10S LED module. The driver you select will depend on your specific requirements.

Product InformationStockPricehf:att:pa_output-currenthf:att:pa_connectionhf:att:pa_dimming

High-power LEDs include a primary optic for protection and light optimization. However, a secondary optic is often essential for better focus and light distribution.

All the optics listed here are 100% compatible with the MR-3500-353-10S LED module.

Note: The optics listed here may not be ideal for ultraviolet or infrared LEDs. You will need to test the optic for your specific application.

Product InformationStockPricehf:att:pa_beam-typehf:att:pa_mounting

To maximize life and reliability, a heatsink or alternate method of cooling is required to ensure that the junction temperature of the LED is kept well below its maximum temperature rating. 

Refer to our Thermal Management articles for assistance selecting an appropriate heatsink from the available options here.

Product InformationStockPricehf:att:pa_length-hshf:att:pa_width-hshf:att:pa_height-hshf:att:pa_cw-filterhf:att:pa_fin-type
RoHS StatusRoHS 3 Compliant
REACH StatusREACH Uneffected
Conflict Minerals ReportCMRT Rev 6.22
Proposition 65 Statement
Proposition 65
PFAS DeclarationPFAS Declaration
ECCNEAR99
HTS8543.70.71.00
Country of OriginCA

Thermal Management

The MR-3500-353-10S Saber LED module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating specified in the Lumileds datasheet.

We recommend that the module be mounted to an aluminum or copper finned heatsink exposed to open air for optimal cooling. The module can be mounted to the heat sink in one of two ways:

Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean to maximize heat transfer to the heatsink. Mechanical fasteners are not recommended for this module.

The bottom of the LED module is electrically neutral, so it is unnecessary to electrically isolate the base from the cooling surface.

Stock

We usually keep a small number of this part in stock. However, we can produce virtually any quantity you require on demand. Please get in touch with us for lead times for orders above 1,000 pieces.

LED Binning

Order quantities less than 1,000 pieces are produced from unbinned stock (cut strips). We can supply binned LED modules (built from full reels)) If you order in 1,000+ quantities, please contact us for binning details.

You can learn more about LED binning here.

LED ColorANSI White
Recommended Operating Current350 mA
Maximum Rated Drive Current1000 mA
Maximum Pulse Current1000 mA
Typical Forward Voltage2.8 Vf
Maximum Forward Voltage3 Vf
Lumens @ 350 mA98 lm
Lumens @ 700 mA172 lm
Typical Wavelength3500 K
Color Rendering Index80 CRI
Beam Angle120°
Typical Forward Voltage2.8 Vf
Thermal Resistance15 °C/W
Maximum Recommended Junction Temp150 °C
Operating Temperature Range-40 to 135 °C
Dimensions (L x W x H)10 x 10 x 5 mm
Weight0.2 g
Refer to the product datasheets for complete specifications.

A current-regulating LED driver is required between the power supply and the LED module to ensure that the LED is not powered above its maximum current rating. You can learn more about powering high-power LED modules here.

All drivers listed here are 100% compatible with the MR-3500-353-10S LED module. The driver you select will depend on your specific requirements.

Product InformationStockPricehf:att:pa_output-currenthf:att:pa_connectionhf:att:pa_dimming

High-power LEDs include a primary optic for protection and light optimization. However, a secondary optic is often essential for better focus and light distribution.

All the optics listed here are 100% compatible with the MR-3500-353-10S LED module.

Product InformationStockPricehf:att:pa_beam-typehf:att:pa_mounting

To maximize life and reliability, a heatsink or alternate method of cooling is required to ensure that the junction temperature of the LED is kept well below its maximum temperature rating. 

Refer to our Thermal Management articles for assistance selecting an appropriate heatsink from the available options here.

Product InformationStockPricehf:att:pa_length-hshf:att:pa_width-hshf:att:pa_height-hshf:att:pa_cw-filterhf:att:pa_fin-type
RoHS StatusRoHS 3 Compliant
REACH StatusREACH Uneffected
Conflict Minerals ReportCMRT Rev 6.22
Proposition 65 Statement
Proposition 65
PFAS DeclarationPFAS Declaration
ECCNEAR99
HTS8543.70.71.00
Country of OriginCA