Free Shipping Offer Details On orders over $200 to the USA and Canada.
Click for details.

Warm White (3100K); 7 LED 40mm Round CoolBase Assembly - 770 lm @ 700mA

Warm White (3100K); 7 LED 40mm Round CoolBase Assembly - 770 lm @ 700mA
The SR-02-WW060 has been discontinued. A suitable substitution is not currently available.
Exclusive to Luxeon Star LEDs, 7 LXML-PWW1-0060 Warm White Rebel LEDs are soldered to a 40mm round, 1/32" FR4 board. This module has been specifically designed to accommodate the Polymer Optics 7 Cell Cluster series of optics, including:The LEDs can be powered in either parallel (singly) or in series with the addition of 0 ohm resistors or solder dots. A Vishay NTC 10K Thermistor (NTHS0805N02N1002J) is mounted to the board to monitor temperature and can be used for foldback temperature control. For more information about using the thermistor, please review our SR-02 Thermal Measurement Guidelines document. The SR-02-WW060 can be ordered in any quantity with quantity discounts available.

Want to power this LED module from a voltage as low as 10VDC? Then check out the FlexBlock LED driver. A single driver can power all 7 of these LEDs connected in series with any voltage from 10V to 18V*.

Need a mixture of different color LEDs pre-mounted to this board? A custom version of this module is also available.

* The maximum voltage must be less than the total forward voltage of all series connected LEDs.

Warm WhiteLED Color
-Lumens @ 350mA
770Lumens @ 700mA
-Lumens @ 1000mA
-Efficacy (lm/W) @ 350mA
49Efficacy (lm/W) @ 700mA
3100 Typical Color Temperature (K) (1)
2540 to 3500 Color Temperature Range (K) (1)
-Color Rendering Index (CRI) (1)
700Recommended Operating Current (mA) (2)
1000Maximum Rated Drive Current (mA)
22.4Typical Forward Voltage (Vf) (3)
27.9Maximum Forward Voltage (Vf) (3,5)
17 C°/WThermal Resistance (C°/W) (1,5)
150Maximum Junction Temperature (C°)
-40 - 125 Operating Temperature Range (C°)
40mm x 3mmDimensions (Dia./H)

1.Values based on 350mA and a Thermal Pad temperature of 25C.
2.This is the maximum operating current that we recommend for this LED. Higher drive currents may be possible, but will require careful design of a suitable cooling system.
3.At the recommended operating current.
4.Typical thermal resistance from the junction of each LED to the bottom of the PCB.
5.This is the value we recommend you use for determining driver input voltage.

Important Note About Stock: We only keep a small number of this item in stock. Additional items are generally built to order. There are no minimum order requirements and the lead time will typically run from 2 to 5 business days. Please contact us for lead times for orders above 100 pieces.

Binned LEDsDo you need LEDs with a specific flux, color or forward voltage? Order this LED module in 150 piece increments and we will build it using LEDs from the same bin. We can also provide specific bin numbers. Contact us for availability.

Click here to learn more about LED binning.
LED Knowledgebase
[email protected]
Phone: 1-347-223-5077
Fax: 1-403-775-4020
Legal & Business Information
Compliance Documents
Privacy Policy
Terms and Conditions
Returns & Refund Policy
Shipping Policy
Payment Options
About Us
Product Index
Category Index
We Accept
Visa Mastercard American Express Pay with Paypal Bitcoin Wire Transfers Check Terms
Currency conversion software

Copyright Quadica Developments Inc. All Rights Reserved.
QUADICA® is is a registered trademark of Quadica Developments Inc.
Commerce Software by 3dcart.