 |
Red (627nm) Rebel LED on a SinkPAD-II 20mm Star Base - 53 lm @ 350mA |
The SP-01-R5 LED module features a single LXM2-PD01-0050 Red, Rebel LED soldered to a SinkPAD-II™ 20mm Star base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red LUXEON Z on a Saber Z1 10mm Square Base - 52 lm @ 500mA |
The SZ-01-H6 LED module features a single LXZ1-PD01 Red LUXEON Z LED soldered to a thermally efficient, 10mm (0.4") square, 1.6mm (0.063") thick MCPCB aluminum base with temperature test point.
This ready-to-use LED module offers both easy handling and a small size that can be worked with using standard bench top tools and hand soldering techniques. This opens up new opportunities for makers, R&D, MRO and low to medium volume OEM manufacturers to use the super small series of LUXEON Z LEDs without the need for specialized pick and place equipment or reflow soldering. |
 |
 |
 |
 |
|
 |
Red LUXEON Z on a Saber Z1 10mm Square Base - 36 lm @ 500mA |
The SZ-01-R7 LED module features a single LXZ1-PD02 Red LUXEON Z LED soldered to a thermally efficient, 10mm (0.4") square, 1.6mm (0.063") thick MCPCB aluminum base with temperature test point.
This ready-to-use LED module offers both easy handling and a small size that can be worked with using standard bench top tools and hand soldering techniques. This opens up new opportunities for makers, R&D, MRO and low to medium volume OEM manufacturers to use the super small series of LUXEON Z LEDs without the need for specialized pick and place equipment or reflow soldering. |
 |
 |
 |
 |
|
|
|
|
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 20mm Star Base - 64 lm @ 350mA |
The SP-01-D9 LED module features a single LXM5-PD01 Red, Rebel LED soldered to a SinkPAD-II™ 20mm Star base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 20mm Star Base - 46 lm @ 350mA |
The SP-01-R2 LED module features a single LXML-PD01-0040 Red, Rebel LED soldered to a SinkPAD-II™ 20mm Star base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 20mm Star Base - 48 lm @ 350mA |
The SP-01-R4 LED module features a single LXM2-PD01-0040 Red, Rebel LED soldered to a SinkPAD-II™ 20mm Star base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 20mm Tri-Star Base - 192 lm @ 350mA |
The SP-03-D9 LED module features 3 LXM5-PD01 Red, Rebel LEDs soldered to a SinkPAD-II™ 20mm Tri-Star base. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 20mm Tri-Star Base - 138 lm @ 350mA |
The SP-03-R2 LED module features 3 LXML-PD01-0040 Red, Rebel LEDs soldered to a SinkPAD-II™ 20mm Tri-Star base. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 20mm Tri-Star Base - 144 lm @ 350mA |
The SP-03-R4 LED module features 3 LXM2-PD01-0040 Red, Rebel LEDs soldered to a SinkPAD-II™ 20mm Tri-Star base. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 23mm Quad Base - 192 lm @ 350mA |
The SP-08-D9 LED module features 4 LXM5-PD01 Red, Rebel LEDs soldered to a SinkPAD-II™ 23mm Quad base. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 23mm Quad Base - 138 lm @ 350mA |
The SP-08-R2 LED module features 4 LXML-PD01-0040 Red, Rebel LEDs soldered to a SinkPAD-II™ 23mm Quad base. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 23mm Quad Base - 144 lm @ 350mA |
The SP-08-R4 LED module features 4 LXM2-PD01-0040 Red, Rebel LEDs soldered to a SinkPAD-II™ 23mm Quad base. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 40mm Round 7-Up Base - 448 lm @350ma |
The SP-02-D9 LED module features 7 LXM5-PD01 Red, Rebel LEDs and NTC thermistor soldered to a SinkPAD-II™ 40mm Round base. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 40mm Round 7-Up Base - 322 lm @350ma |
The SP-02-R2 LED module features 7 LXML-PD01-0040 Red, Rebel LEDs and NTC thermistor soldered to a SinkPAD-II™ 40mm Round base. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 40mm Round 7-Up Base - 336 lm @350ma |
The SP-02-R4 LED module features 7 LXM2-PD01-0040 Red, Rebel LEDs and NTC thermistor soldered to a SinkPAD-II™ 40mm Round base. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 10mm Square Base - 64 lm @ 350mA |
The SP-05-D9 LED module features a single LXM5-PD01 Red, Rebel LED soldered to a SinkPAD-II™ 10mm Square base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 10mm Square Base - 46 lm @ 350mA |
The SP-05-R2 LED module features a single LXML-PD01-0040 Red, Rebel LED soldered to a SinkPAD-II™ 10mm Square base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 10mm Square Base - 48 lm @ 350mA |
The SP-05-R4 LED module features a single LXM2-PD01-0040 Red, Rebel LED soldered to a SinkPAD-II™ 10mm Square base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II with Side Emitting Optic - 64 lm @ 350mA |
The SP-04-D9 LED module combines a Fraen F360L-3C-S side emitting optic with a single LXM5-PD01 Red, Rebel LED soldered to a SinkPAD-II™ 15.6mm by 11mm rectangular base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
|
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 25mm Square Base with 9° Optic - 64 lm @ 350mA |
The SP-12-D9 LED module has been specifically designed to work as a drop-in replacement for the original Luxeon Star/O LED series that are no longer manufactured by Lumileds. This LED module is built using a Fraen FLP-N4-RE-HRF optic and has a near identical form factor to the original Star/O. It can typically be cooled and powered using the same heat sink and driver used for the original Star/O.
This module features LXM5-PD01 Red, Rebel LED soldered to a SinkPAD-II™. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, lumens output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 25mm Square Base with 9° Optic - 46 lm @ 350mA |
The SP-12-R2 LED module has been specifically designed to work as a drop-in replacement for the original Luxeon Star/O LED series that are no longer manufactured by Lumileds. This LED module is built using a Fraen FLP-N4-RE-HRF optic and has a near identical form factor to the original Star/O. It can typically be cooled and powered using the same heat sink and driver used for the original Star/O.
This module features LXML-PD01-0040 Red, Rebel LED soldered to a SinkPAD-II™. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, lumens output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 25mm Square Base with 9° Optic - 48 lm @ 350mA |
The SP-12-R4 LED module has been specifically designed to work as a drop-in replacement for the original Luxeon Star/O LED series that are no longer manufactured by Lumileds. This LED module is built using a Fraen FLP-N4-RE-HRF optic and has a near identical form factor to the original Star/O. It can typically be cooled and powered using the same heat sink and driver used for the original Star/O.
This module features LXM2-PD01-0040 Red, Rebel LED soldered to a SinkPAD-II™. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, lumens output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 25mm Round Base - 64 lm @ 350mA |
The SP-06-D9 LED module features a single LXM5-PD01 Red, Rebel LED soldered to a SinkPAD-II™ 25mm Round base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 25mm Round Base - 46 lm @ 350mA |
The SP-06-R2 LED module features a single LXML-PD01-0040 Red, Rebel LED soldered to a SinkPAD-II™ 25mm Round base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 25mm Round Base - 48 lm @ 350mA |
The SP-06-R4 LED module features a single LXM2-PD01-0040 Red, Rebel LED soldered to a SinkPAD-II™ 25mm Round base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 20mm Star Base - 62 lm @ 350mA |
The SP-01-D8 LED module features a single LXM2-PD01-0060 Red, Rebel LED soldered to a SinkPAD-II™ 20mm Star base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 20mm Tri-Star Base - 159 lm @ 350mA |
The SP-03-R5 LED module features 3 LXM2-PD01-0050 Red, Rebel LEDs soldered to a SinkPAD-II™ 20mm Tri-Star base. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 10mm Square Base - 53 lm @ 350mA |
The SP-05-R5 LED module features a single LXM2-PD01-0050 Red, Rebel LED soldered to a SinkPAD-II™ 10mm Square base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 23mm Quad Base - 159 lm @ 350mA |
The SP-08-R5 LED module features 4 LXM2-PD01-0050 Red, Rebel LEDs soldered to a SinkPAD-II™ 23mm Quad base. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 40mm Round 7-Up Base - 371 lm @350ma |
The SP-02-R5 LED module features 7 LXM2-PD01-0050 Red, Rebel LEDs and NTC thermistor soldered to a SinkPAD-II™ 40mm Round base. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 25mm Square Base with 9° Optic - 53 lm @ 350mA |
The SP-12-R5 LED module has been specifically designed to work as a drop-in replacement for the original Luxeon Star/O LED series that are no longer manufactured by Lumileds. This LED module is built using a Fraen FLP-N4-RE-HRF optic and has a near identical form factor to the original Star/O. It can typically be cooled and powered using the same heat sink and driver used for the original Star/O.
This module features LXM2-PD01-0050 Red, Rebel LED soldered to a SinkPAD-II™. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, lumens output and overall reliability. |
 |
 |
 |
 |
|
 |
Red (627nm) Rebel LED on a SinkPAD-II 25mm Round Base - 53 lm @ 350mA |
The SP-06-R5 LED module features a single LXM2-PD01-0050 Red, Rebel LED soldered to a SinkPAD-II™ 25mm Round base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Red (627nm) LUXEON Rebel LED; Mounted on a 25mm Square CoolBase - 75 lm @ 700mA |
The SR-12-D0040 high power LED lighting assembly has been specifically designed to work as a drop-in replacement for the LXHL-ND98 Luxeon Star/O that is no longer manufactured by Philips Lumileds. This assembly is built with a Fraen FLP-N4-RE-HRF optic and has a near identical form factor to the original Star/O and can typically be cooled and powered using the same heat sink and driver used for the LXHL-ND98. |
 |
 |
 |
 |
|
 |
Red (627nm) LUXEON Rebel LED; Mounted on a 25mm Square CoolBase - 106 lm @ 700mA |
The SR-12-D2050 high power LED lighting assembly has been specifically designed to work as a drop-in replacement for the LXHL-ND94 Luxeon Star/O that is no longer manufactured by Philips Lumileds. This assembly is built with a Fraen FLP-N4-RE-HRF optic and has a near identical form factor to the original Star/O and can typically be cooled and powered using the same heat sink and driver used for the LXHL-ND94. |
 |
 |
 |
 |
|
 |
Red (627nm) LUXEON Rebel LED; Mounted on a 25mm Square CoolBase - 90 lm @ 700mA |
The SR-12-D2040 high power LED lighting assembly has been specifically designed to work as a drop-in replacement for the LXHL-ND94 Luxeon Star/O that is no longer manufactured by Philips Lumileds. This assembly is built with a Fraen FLP-N4-RE-HRF optic and has a near identical form factor to the original Star/O and can typically be cooled and powered using the same heat sink and driver used for the LXHL-ND94. |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|