 |
Deep Red (655nm) Rebel LED on a SinkPAD-II 20mm Star Base - 360 mW @ 350mA |
The SP-01-D2 LED module features a single LXM3-PD01 Deep Red, Rebel LED soldered to a SinkPAD-II™ 20mm Star base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
 |
|
|
|
|
 |
Deep Red (655nm) Rebel LED on a SinkPAD-II 20mm Tri-Star Base - 1080 mW @ 350mA |
The SP-03-D2 LED module features 3 LXM3-PD01 Deep Red, Rebel LEDs soldered to a SinkPAD-II™ 20mm Tri-Star base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
|
|
|
|
|
 |
Deep Red LUXEON Z on a Saber Z1 10mm Square Base - 325 mW @ 500mA |
The SZ-01-H5 LED module features a single LXZ1-PA01 Deep Red LUXEON Z LED soldered to a thermally efficient, 10mm (0.4") square, 1.6mm (0.063") thick MCPCB aluminum base with temperature test point.
This ready-to-use LED module offers both easy handling and a small size that can be worked with using standard bench top tools and hand soldering techniques. This opens up new opportunities for makers, R&D, MRO and low to medium volume OEM manufacturers to use the super small series of LUXEON Z LEDs without the need for specialized pick and place equipment or reflow soldering. |
|
|
|
|
|
|
|
|
|
|
|
 |
Far Red (720nm) Rebel LED on a SinkPAD-II 25mm Square Base with 9° Optic - 260 mW @ 350mA |
The SP-12-D4 LED module has been specifically designed to work as a drop-in replacement for the original Luxeon Star/O LED series that are no longer manufactured by Lumileds. This LED module is built using a Fraen FLP-N4-RE-HRF optic and has a near identical form factor to the original Star/O. It can typically be cooled and powered using the same heat sink and driver used for the original Star/O.
This module features LXML-PF01 Far Red, Rebel LED soldered to a SinkPAD-II™. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, lumens output and overall reliability. |
|
|
|
|
|
 |
Deep Red (655nm) Rebel LED on a SinkPAD-II 10mm Square Base - 360 mW @ 350mA |
The SP-05-D2 LED module features a single LXM3-PD01 Deep Red, Rebel LED soldered to a SinkPAD-II™ 10mm Square base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
|
|
|
|
|
 |
Deep Red (655nm) Rebel LED on a SinkPAD-II 23mm Quad Base - 1080 mW @ 350mA |
The SP-08-D2 LED module features 4 LXM3-PD01 Deep Red, Rebel LEDs soldered to a SinkPAD-II™ 23mm Quad base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
|
|
|
|
|
 |
Deep Red (655nm) Rebel LED on a SinkPAD-II 40mm Round 7-Up Base - 2520 mw @350ma |
The SP-02-D2 LED module features 7 LXM3-PD01 Deep Red, Rebel LEDs and NTC thermistor soldered to a SinkPAD-II™ 40mm Round base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
|
|
|
|
|
 |
Deep Red (655nm) Rebel LED on a SinkPAD-II 25mm Square Base with 9° Optic - 360 mW @ 350mA |
The SP-12-D2 LED module has been specifically designed to work as a drop-in replacement for the original Luxeon Star/O LED series that are no longer manufactured by Lumileds. This LED module is built using a Fraen FLP-N4-RE-HRF optic and has a near identical form factor to the original Star/O. It can typically be cooled and powered using the same heat sink and driver used for the original Star/O.
This module features LXM3-PD01 Deep Red, Rebel LED soldered to a SinkPAD-II™. The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, lumens output and overall reliability. |
|
|
|
|
|
 |
Deep Red (655nm) Rebel LED on a SinkPAD-II 25mm Round Base - 360 mW @ 350mA |
The SP-06-D2 LED module features a single LXM3-PD01 Deep Red, Rebel LED soldered to a SinkPAD-II™ 25mm Round base.
The SinkPAD-II™ uses second generation technology to minimize thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminium base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output and overall reliability. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Deep Red (655nm) LUXEON Rebel LED; Mounted on a 25mm Square CoolBase - 640 mW @ 700mA |
| The SR-12-D0000 high power LED lighting assembly has been specifically designed to work as a drop-in replacement for the LXHL-ND94 Luxeon Star/O that is no longer manufactured by Philips Lumileds. This assembly is built with a Fraen FLP-N4-RE-HRF optic and has a near identical form factor to the original Star/O and can typically be cooled and powered using the same heat sink and driver used for the LXHL-ND94. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
